steering shaft
英 [ˈstɪərɪŋ ʃɑːft]
美 [ˈstɪrɪŋ ʃæft]
网络 转向轴; 转向柱
双语例句
- The forming process of steering shaft was analyzed, the manufacturing procedure of the part was determined.
对转向轴零件进行了工艺分析，制定了工艺路线。 - Counter crankshaft rotation The steering wheel is mounted on a steering shaft that extends into the steering gear.
反曲轴转动方向的转动转向盘安装在转向轴上，转向轴延伸至转向器。 - A propeller is arranged at the lower part of cover body in a circular arch shape and is connected with the motive power steering engine in a shaft connection.
有一螺旋桨，置于圆拱形罩体的下方并与动力舵机的轴连接。 - If the sliding piece was pulled off the steering shaft, the notch must point towards the tooth gap during assembly.
如果滑动件被从转向轴上拔下，则在装配期间切口必须指向齿隙。 - If the snap ring becomes disengaged and the steering wheel is then repeatedly turned to the full locked position, the steering shaft may disengage over time.
如果成为脱离卡环和方向盘，然后反复转向全面锁定位置，转向轴可以脱离了时间。 - So that the cut-out in steering shaft will be visible in the opening of cover, first turn the steering wheel from the initial position as required.
如此，转向轴上的缺口就能从盖上的开口处看见。首先，按要求将方向盘从初始位置开始转动。 - The pinion gear is attached to the steering shaft.
该齿轮连接转向轴。 - Play in steering shaft line.
转向轴管路中有间隙。 - Loose or worn steering shaft coupler
转向轴连结器松动或磨损 - Before fitting the universal joint to the upper steering shaft, the front wheels, steering wheel and airbag contact unit must be positioned correctly relative to each other.
将万向节安装到转向轴之前，前轮、方向盘及气囊螺旋线圈必须正确定位相对位置。 - Slide the lower steering shaft onto the upper steering shaft.
将下转向轴滑到上转向轴上。 - The steering shaft must not move while doing this.
执行此操作时，转向轴不得移动。 - Inner lug must engage fully in the cut-out of steering shaft.
内部凸耳必须完全嵌入转向轴缺口中。 - Stress Analysis of Steering Rudder Shaft of Submarine
潜艇方向舵舵轴的应力分析 - This article analyzes some regulations for safety steering column, discusses the distribution of crashing ( energy) and the structures and the safety control principls with flex steering shaft, breaking steering shaft, sleeve steering pillar tube as well as ripples tube steering pillar tube.
分析了安全转向柱的法规要求，汽车碰撞能量的分配，伸缩式转向轴、可断开式转向轴、套筒式转向柱管、波纹管式转向柱管等的结构和安全控制原理。 - The precision forging process for the steering sector gear shaft is discussed in the paper. The principle and the path of forming of the hot extruding and upsetting are also discussed.
介绍了热挤镦加热精整汽车转向机摇臂轴精锻成形工艺，对热挤镦的成形原理及变形过程进行了分析探讨。 - A New Process of Universal Joint Bearings to Reduce Angular Clearance of Steering Shaft
一种减小转向传动轴角间隙的万向节轴承工艺 - The failure cause of steering shaft of the minitype tractor was analyzed.
对小型拖拉机转向轴早期出现的断裂原因进行了分析。 - Automatic Control of Toe-in of Non Steering Axle with Swing Shaft
摆动半轴汽车非转向桥的自动前束控制 - On-Line Test Device for Measuring the Spline and Thread Of Automobile Steering Shaft
汽车转向轴花键螺纹在线检测装置 - Failure Analysis of the Steering Shaft of Minitype Tractor
小型拖拉机转向轴失效分析 - A New CNC System for Variable Ratio Sector Gear Shaping Precision Forging Technology for the Steering Sector Gear Shaft
变速比齿扇插齿加工的新型CNC系统汽车转向机摇臂轴精锻成形工艺 - Control experiment on tractive and appendiculate performance of the tire and iron wheel with lugs fitted together The failure cause of steering shaft of the minitype tractor was analyzed.
叶轮与胶轮并装对小型拖拉机牵引附着性能的影响对小型拖拉机转向轴早期出现的断裂原因进行了分析。 - The developed grinder is used to grind the steering gear, fan-shaped gear arm shaft, and convex and concave circular arc surfaces for aero-engine vanes.
利用该磨床对转向齿、扇形齿摆臂轴、叶片圆弧叶冠的凸凹圆弧面进行试磨。 - A certain type of recirculating ball steering gear in the use of the process had many cases of unilateral heavy failure, through the customer service feedback, the back check analysis found that the steering arm shaft of teeth from the root fracture.
某型号循环球转向器在使用过程中，通过售后反馈的信息来看，发生了多起单边沉重失效，经返检分析发现转向臂轴中齿从根部断裂。 - The steering shaft and road-feeling motor are modeled. Laplace transform of the model, make out the control problem of the whole system.
以台架为原型建立了方向盘和转向轴的模型、路感电机的模型，对模型进行拉普拉斯变换，整理得到整个系统的控制问题。 - The steering shaft and assistance structure of the column-mounted electric power steering system are modeled.
针对转向轴助力式电动助力转向系统，建立了转向轴和助力机构的模型。